Greywater pre-treatment - grease separators
solutions for the treatment and purification of waste water through the separation of fats
Greywater pre-treatment – grease separators
The accumulation of fat in the plant can cause many problems, for this reason, theinstallation of a degreaser or grease separators is important to protect:
1. Piping systems for wastewater
in The accumulation of deposits of grease, oil, fat (also known as FOG) and food residues can cause buildup, clogging, corrosion of sewers and unpleasant smells, causing significant damage to the exhaust systems, and the consequent additional costs for the maintenance and restore.
2. The treatment plants of waste water
The interception of fats is essential to avoid the overloading of organic interfere in the early stages of treatment, later, the secondary treatment.
3. The environment
of These interceptors, grease-they prevent to be poured into the water with loads of contaminants that are too high to decompose in the early stages of biological treatment to the valley.
The regulations that govern the treatment of the waters of many countries, it is often required separators of fat in certain contexts. A conscious management of the waste water from municipal, commercial and industrial, contribute to prevent the pollution of soils and aquifers, and helps to preserve water, the most valuable asset of our planet.
Lcommitment of ISEA for the protection of the environment is attested fromoffering a complete range of systems that ensure the proper treatment of wastewater and the respect of the requirements of the law in accordance with the regional regulations.
The solutions ISEA brand Isea include degreasers, septic tanks, fosse Imhoff, activated sludge plants and treatment with trickling filters that can be installed in the buildings, civil, commercial and industrial for the treatment and management of wastewater.
Why install a system for the purification of wastewater, civil, commercial and industrial?
A conscious management of the waste water from municipal, commercial and industrial, contribute to prevent the pollution of soils and aquifers, and helps to preserve water, the most valuable asset of our planet. Lcommitment of Aliaxis for the protection of the environment is attested fromoffering a complete range of systems that ensure the proper treatment of wastewater and the respect of the requirements of the law in accordance with the regional regulations. The solutions Aliaxis brand Isea include degreasers, septic tanks, fosse Imhoff, activated sludge plants and treatment with trickling filters that can be installed in the buildings, civil, commercial and industrial for the treatment and management of wastewater.
What is a degreaser or fat separator?
The separators of fat are used for the pretreatment of the water from buildings (cookers, washing machines, sinks, showers, and so on), or the catering and food processing (hotels, restaurants, canteens etc.,) before delivery to the public sewer systems or to mount to a suitable treatment plant (activated sludge, sub-irrigation, a sand filter, and so on).
Aliaxis offers a portfolio of products specifically in the field of wastewater treatment, the division Isea designs and manufactures innovative solutions to offer ahigh treatment efficiency , to meet the specific needs of the Customers.
Separators or interceptors, grease brand Isea are produced in Italy, meet european standards and are equipped with the CE mark.
How to use a degreaser?
An eavesdropper fat by using the principle of gravity separation: the separation of fats is a physical process of removal of all fat and oily, that have specific weight lower than that of the wastewater, a typical discharges from kitchens, restaurants or canteens.
Inside the tub condensing fatty substances contained in the wastewater, such as water, grease and dirt particles (sludge) are separated because of their different density.
Grease, oil and grease (the density of which is 10-15% less than water) to float towards the top of the separator, while the sludge heavier will sink to the bottom of the separator.
The waste water treated exit through an exit for the selective clean from pollutants that are trapped in the degreaser.
Once the degreaser is full, the fats, oils and sludge are disposed of by a car bleeding, which conveys them at a plant for final treatment.
The new degreaser automatic Self-Clean is designed for specific applications in Hotellerie-Restaurant-Café
The new degreaser I have.KING.CA self-cleaning is available in four models:
Self-Clean – Elite
version Elite of degreasers Self Clean system is fully automated; the cleaning operations take place in the automatic mode. The system is equipped with control logic and can be interfaced with BMS systems external.
This option is the ideal solution for those in need of atotal automation in terms of management and maintenance, without the direct intervention of operators, such as, for example, the hotel chain’s restaurants. On request it is also possible to create a system of custom cleaning to high pressure.
Self-Clean – Plus
version Plus of degreasers Self-Clean proposes an automatic alarm, wash, and fill. The flush operation must be carried out by means of an aspirator.
→ Recommended for applications in restaurants, especially in situations in which the services are available to maintenance for the emptying and cleaning of equipment. The equipment is also designed to support the integration of remote sensors.
Option Pro
the Pro version of The degreasers Self-Clean offers a basic system that requires filling and alarm, the fat and the automatic washing and emptying fully manual.
→ The system is designed to offer a first level of automation, while maintenance operations are the responsibility of the customer. Suitable for all types of residential and more qualified.
Basic setting
The Basic version of degreasers Self-Clean offers a particulate trap grease static: all the operations are performed manually by an operator at intervals to check on a regular basis.
→ The only interceptor grease static provides for the management to be fully borne by the customer. Most suitable for residential contexts with low rates of separation.
The advantage of a degreaser automatic
The fat separators of the series Horeca, are designed for the specific application in the professional kitchens of restaurants, canteens, fast food.
Thanks to their system of emptying and cleaning automated, allow you to dramatically reduce the cleaning operations at regular intervals.
During the flush operation, which takes place directly from the outside through a discharge, you’ll minimize the operational impact, and is strongly contained in the issues of bad smell typical of these operations.
All of this greatly reduces the interruption of services, minimize the overall impact of the operation and allows you the time of shooting very fast.
Regulatory requirements
The family of the degreasers ISEA
The interceptors, grease, offer a solution that is practical and efficient for many applications of wastewater treatment.
The ease of access, cost-effectiveness, and flexibility that distinguish them, make this an excellent choice for companies looking for a treatment plant, wastewater reliable and efficient.
Thanks to their design, require less excavation activities and installation, reducing installation costs, and maintenance.
The interceptors, grease, are highly flexible and can be repositioned easily, according to need.
DEGREASER AUTOMATIC HO.RE.CA.
The degreaser for the management of fats for professional kitchens, and industrial, Hotel, Restaurant and Café.
DEGREASER FAMILY – TOP – PUBLIC (with vent)
Degreaser polyethylene monobloc, used as a pre-treatment of the waste water of the civil.
DEGREASER PC (with vent).
The degreaser in polyethylene monobloc, used as a pre-treatment of the waste water of the civil.
DEGREASER PLUS (Ex. Emilia-Romagna, Umbria) (with vent),
a Degreaser in polyethylene monobloc, used as a pre-treatment of waste water, in accordance with local regulations in the Region Emilia Romagna and in the Region of Umbria.
DEGREASER SL (with vent).
Degreaser Under the Sink in polyethylene monobloc, to install in confined spaces, for theinterception of fat in small business activities such as professional kitchens, caterers, canteens.
Advantages of the solutions ISEA
- Ready for installation,
- Conforming to standards
- , Ease of management and maintenance
